![]() ![]() Recovery of the found data will occur automatically (you will have to enter a license key that you get after purchasing a license ). Select “Open as” -> “Reader” or “Uneraser”. Select the type of RAID array (in this case, RAID 5). Choose the disks and location for the RAID recovery. After the disk is connected, click “Commands” -> “ RAID wizard”. 2.1 Select "Disk image of RAW" -> "Next" -> "Select and attach a disk image".Perform these actions: Click "Disks" -> "Mount image". Connect the defective disk array as independent local drives to your computer. In case you are recovering lost files using a RAID disk image: Save your recovered files somewhere else, not the original place. To save recovered data, follow the wizard. After scanning, which may take a while, you will be able to preview recovered files. ![]() Use Reader or Uneraser mode to open the logical disk (it is contained in the hard drive section of the RAID disk). Open the RAID Wizard and select RAID members. The damaged disk array connects to the computer as independent local drives. Download and install Diskinternals RAID Recovery. And only after you make sure that your data is recoverable, do you need to pay a license for saving it. It has a free trial version with all the features of a licensed one. You can recover data as much as possible using RAID Recovery software. But what if your data is gone already is it too late? If you have used the tips described above, you should not have any lost data. Otherwise, the file system will be fixed and delete or re-corrupt all data on the disk. Never use CHKDSK or FSCK before creating a backup.All this will lead to overwriting data on a damaged disk. Until the data is restored, you should be careful in all your actions: do not create, copy, move, add, delete or save any files on the disk do not open bulky programs and applications.Here is what is recommended to do before you rebuild a RAID 5 array: So, how do you not lose any data in the rebuilding process? ![]() ![]() Tips to rebuild a RAID 5 array without data loss Because after rebuilding a RAID 5 array, the data will be overwritten i.e., it will disappear forever. If you do not have any backup, be sure to use RAID Recovery software to recover data from a damaged RAID disk. Even if two RAID disks go down, you have nothing to worry about. If you have a backup of your data, that's great. All you have to do to avoid RAID 5 death is replace the failed disk itself. In this case, RAID 5 data recovery will be pretty hard and almost impossible. If RAID 5 is not regularly monitored and tested, and the defective drive not replaced, there is a very high probability of another disk crash. Also, it should be mentioned, that for RAID array using similar disks, if one disk has failed already, then other disks will follow it soon. And it is only a matter of time before the second drive will fail. If RAID 5 works in that worsened condition, when other disks "replace" and perform tasks instead of the defective drive, that means they will deteriorate faster. Of course, that is only one drive you can work well and not notice any kind of data loss. Rebuilding a RAID 5 array is necessary in cases where one disk of the RAID 5 array stops working, even if it does so temporarily. When you need to rebuild a RAID 5 array and why you need to back up ![]()
0 Comments
Leave a Reply. |